Digital / Remote Expansion Modules
The Innotech Omni U10 (OMU10) Remote Expansion Module (REM) provides an additional 10 Programmable Points (UI/O) for the connected Omni controller.The Omni U10 REM is housed in a DIN rail mounted Omni-style enclosure.The Omni U10 REM is fully programmable via the Innotech Focus graphical configuration utility.The Omni U10 REM may be located locally or remotely to the connected Omni controller. A dedicated communications bus connects all Omni U10 REMs.
The Innotech Omni U10 (OMU10) Remote Expansion Module (REM) provides an additional 10 Programmable Points (UI/O) for the connected Omni controller.
The Omni U10 REM is housed in a DIN rail mounted Omni-style enclosure.
The Omni U10 REM is fully programmable via the Innotech Focus graphical configuration utility.
The Omni U10 REM may be located locally or remotely to the connected Omni controller. A dedicated communications bus connects all Omni U10 REMs.
The Omni U10 REM provides additional Programmable Points (Universal Inputs/Outputs) for Omni Controllers.
Omni's flexible UI/O enables any point to be used for any purpose.
The CE label is a European marking for products to indicate conformity with the electromagnetic compatibility and health and safety requirements set out in European Union.
FCC marking indicates that the product conforms with the regulations of the U.S. Federal Communications Commission (FCC) for microprocessor-based equipment.
The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.
UL marking for USA and Canada indicates that the product conforms with the safety standards laid down by Underwriters Laboratories.
The operating voltage must meet the requirements of Safety Extra Low Voltage (SELV) to EN60730. The transformer used must be a class 2 safety transformer in compliance with EN60742 and be designed for 100% duty. It must also be sized and fused in compliance with local safety regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Note – This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Modifications to this device, may void the authority granted to the user by the FCC to operate
The software on this product may contain copyright protected software which is licensed under various open source licenses.
Copies of the corresponding licenses:
If foreseen in the corresponding open source license, you may obtain the corresponding source code and other related data for a period of three years after our last shipment of this product, by sending an email to [email protected]. Please include the product model number, system version information and the corresponding license you wish to enquire about. This offer is valid to anyone in receipt of this information.
View our distributor list
We are a proud AIRAH member