SENW22 Wall Mounted Detector Product Details

Home > Products > Product Search > Product Details > SENW22 Wall Mounted Detector

SENW22 Wall Mounted Detector

Stand-alone / Detectors

The SENWxx Series are wall mounted temperature detectors designed to work with other Innotech products.

Models:
SENW22: Detector External Adj. 4°C
SENW25: With After Hours Switch
SENW25L: With After Hours Switch and LED
SENW26: Detector and Remote Adjuster
SENW27: Detector External Adj. 4°C with After Hours Switch

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Detectors are interchangeable
Not polarity sensitive
Attractive low profile case blends with any decor
Cover secured by positive locking clip
Mounting screws are invisible

The SENW22, SENW25x, SENW26, and SENW27 temperature detectors are designed to work with Innotech IMT, IWP, IWC, MT01, MTC, ES3, M2K, MS1, MS5, MAXIM, and Genesis II range of controllers.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Operating Mode

10KΩ Thermistor

Environmental

Operating Temperature: 0°C to 50°C non-condensing
Storage Temperature: 0°C to 50°C non-condensing

Note: The operating temperature range depends on the Innotech controller to which the SENWxx temperature detector is connected.

Enclosure
Housed in a rectangular case suitable for wall mounting. Housing molded from flame retardant plastics recognized by UL as UL94-V0.

Color: White / Light Grey
Dimensions (Maximum): (W)91mm x (H)72mm x (D)32mm

Use of the After Hours Switch
The SENW25, SENW25L, and SENW27 series products feature an After Hours switch, which is designed for use with the Innotech Genesis or MAXIM range of controllers.

Pressing the After Hours switch creates an interruption in the reading of the thermistor sensor. This interruption is detected by the connected Genesis or MAXIM controller.

The Genesis or MAXIM series controller can utilise this information as part of its programmed configuration.

Note: Use of the After Hours Switch requires the SENW25, SENW25L, and SENW27 products to be used with the Innotech Genesis or MAXIM series of digital controllers.

LED Operation
The SENW25L features an LED which is powered by a 10V DC input. The LED is only visible when active.

The SENW25L LED functionality is designed for use with the Genesis and MAXIM range of digital controllers.