IMC5322 Modular Controller with Economy Cycle Product Details

Home > Products > Product Search > Product Details > IMC5322 Modular Controller with Economy Cycle

IMC5322 Modular Controller with Economy Cycle

Stand-alone / Controllers

The Innotech IMC53xx range of modular controls are designed to provide a modulating economy cycle output and regulate the stages of cooling and heating on air conditioning systems.

The economy cycle output can be enabled by an outside air sensor used to measure the difference between outside and indoor temperature. Alternatively a contact input can enable the economy output. The controls are suitable for use in single or multizone temperature applications. Multiple controllers can be grouped to a common enthalpy control or outside air thermostat.

Note: Limited set point adjusters can not be used with this product (eg. IRA4002).

Models in the IMC53hc range:

IMC5311 Economy Cycle plus 1 Stage COOL and 1 Stage HEAT.
IMC5322 Economy Cycle plus 2 Stage COOL and 2 Stage HEAT.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Interface to Building Automation Systems.
Time integrated proportional control action for optimum system performance.
Separate 0-10V DC outputs for heating, ecomomy cycle and cooling.
Separate proportional band adjustment for heating and cooling.
Two detector averaging of indoor temperature is available.
Indoor detector temperature easily read at controller.
Economy cycle proportional band set to 0.5°C.
LED indication of relay status.
Factory set for most applications resulting in reduced commissioning time.
The Innotech enclosure saves space and reduces installation time.
Wide range of applications.

The Innotech IMC53xx range of modular controls are designed to provide a modulating economy cycle output and regulate the stages of cooling and heating on air conditioning systems.

The economy cycle output can be enabled by an outside air sensor used to measure the difference between outside and indoor temperature. Alternatively a contact input can enable the economy output. The controls are suitable for use in single or multizone temperature applications. Multiple controllers can be grouped to a common enthalpy control or outside air thermostat.

NOTE: Limited set point adjusters can not be used with this product (EG. IRA4002).

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Voltage: 24 Volts AC ±10% @ 50/60Hz.
Power Consumption: 6VA max.

Inputs:
1 x two wire current loop air detector for indoor temperature monitoring.
1 x two wire current loop air detector for outdoor temperature monitoring

Outputs:

Temperature Out 0.1V DC per °C.
Set Point Out 0.1V DC per °C - for measurement only.
0 to 10V DC Heating control output.
0 to 10V DC Cooling control output.
0 to 10V DC Economy cycle output.
One SPDT voltage free contact per stage (2 amp max).

Terminal Identification:

1&2 = Indoor detector connection.
3 = Indoor Temperature Out.
TAG = Set Point measurement point.
4&5 = Economy cycle connections.
6 = 0-10V DC economy cycle output.
7 = 0-10V DC cool output.
8 = 0-10V DC heat output.
9 = Common/0V supply MUST BE EARTHED.
10 = 24V AC or +24V DC supply.

Relay Terminal Identification:

A:B = N/O : N/C Stage 2 Cool.
C = Common for Cool relays.
D:E = N/O : N/C Stage 1 Cool.
F:G = N/O : N/C Stage 1 Heat.
H = Common for Heat relays.
I:J = N/O : N/C Stage 2 Heat.

Temperature Ratings:

Storage 0 to 50°C non-condensing.
Operating 0 to 40°C non-condensing.

Enclosures:
The IMC53XX product is housed in a rectangular case suitable for DIN rail mounting. The housing is moulded from flame retardant plastics recognised by UL as UL 94-V0.

Colour: Grey.
Dimensions: 155mm X 75mm X 57mm