IG03 BACnet Gateway Product Details - Innotech Control Systems

Home > Products > Product Search > Product Details > IG03 BACnet Gateway

IG03 BACnet Gateway

Digital / Controllers

This product has been superseded.

Replacement Product: Omni BEMS Controller

The Innotech^® BACnet Gateway is a protocol gateway between Innotech Controllers via the Innotech Net Comms network and BACnet devices via BAC/IP or MSTP networks.

The basic operation of the BACnet Gateway is to pass data between Innotech and BACnet networks. Points which are to be shared are mapped in the Innotech Fusion software and transferred to the Gateway.

The operation of the Gateway is to interrogate both the Innotech and BACnet networks to store the current value of the mapped points. The value is then regularly updated to the mapped point on the opposing network.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

2 x Isolated RS485 serial Net Comms Network ports (PC and NET)
1 x Isolated BACnet MSTP RS485 port
1 x Isolated Ethernet (10baseT) port
User selectable Baud rate on RS485 Net Comms Network ports
User selectable Baud rate on BACnet MSTP network port
All wires connected by pluggable screw terminals
Program resides in non-volatile flash RAM
Real-Time Clock (battery backed)
Visual indication of power, system and communication activity
Provides two-way communications between networks

The Innotech BACnet Gateway allows points on Innotech controllers to be directly mapped with objects on BACnet Networks. The BACnet Gateway supports mappings between Innotech and BACnet BAC/IP networks OR between Innotech and BACnet MSTP networks.

Note: The Innotech BACnet Gateway does not function as a BACnet Router between BAC/IP and MSTP networks.

	CE	https://europa.eu/youreurope/business/product/ce-mark/index_en.htm The CE label is a European marking for products to indicate conformity with the electromagnetic compatibility and health and safety requirements set out in European Union.
	FCC	https://www.fcc.gov FCC marking indicates that the product conforms with the regulations of the U.S. Federal Communications Commission (FCC) for microprocessor-based equipment.
	RCM	https://www.acma.gov.au The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.
	UL	https://www.ul.com UL marking for USA and Canada indicates that the product conforms with the safety standards laid down by Underwriters Laboratories.

Power Supply Requirements

24VAC ± 10% @ 50/60 Hz
Power consumption: 4VA
24VDC ± 10%
Power consumption: 2.3W
Recommended transformer rating of 8VA or greater.

The operating voltage must meet the requirements of Safety Extra Low Voltage (SELV) to EN60730. The transformer used must be a Class 2 safety transformer that has the energy and voltage limiting characteristics as described in the National Electrical Code, ANSI/NFPA70. It must also be sized and fused in compliance with local safety regulations.

Battery
Contains a lithium type battery, dispose of properly.
(In accordance with local regulations)

Type: CR-2032 Lithium Battery
Nominal voltage: 3 Volts
Shelf life: 5 years, dependent on ambient temperature

Caution: Risk of explosion if battery is replaced by an incorrect type.

Temperature Ratings

Storage: -5 to 50°C non-condensing
Operating: 0 to 50°C non-condensing

Enclosure/Mounting
The BACnet Gateway is housed in a rectangular case suitable for DIN Rail mounting. The housing is moulded from flame retardant plastics recognised by UL as UL 94-V0.

Colour: Grey
Dimensions (max): 71mm x 115mm x 67mm

LED Indication

Power (Red LED)
- Indicates power is supplied to the device
Heartbeat (Green LED)
- Regular flashing indicates device is operational
Comms (3 x Bicolour LEDs)
- Indicate RS485 network activity on each channel. The LEDs for each channel are physically aligned with the appropriate comms connector for that channel.
- Transmit = Red, Receive = Green
Link (Orange LED, RJ45 Socket)
- Indicates connectivity to Ethernet
Activity (Green LED, RJ45 Socket)
- Indicates network activity

Communications
The BACnet Gateway acts as the network master managing communications on the Innotech Net Comms Network. As such, all Innotech Net Comms traffic must pass through the Gateway.

iComm Communications Server must be configured to communicate to the Innotech device network through the "PC" RS485 port or Ethernet port on the Gateway. The Device Network must be connected to the "NET" RS485 port.

PC
- RS485 Serial communications channel for interfacing with Innotech Head End Software. Connectivity is provided through a 5-way pluggable screw terminal connector on the front of the product.
Net
- RS485 Serial communications channel for interfacing with Innotech Network Devices. The BACnet Gateway will manage the communications required for correct Gateway operation and Communications from iComm Connectivity is provided through a 5-way pluggable screw terminal connector on the front of the product.
BACnet MSTP
- RS485 Communications channel for interfacing directly with a BACnet MSTP network. Connectivity is provided through a 3-way pluggable screw terminal on the bottom right of the device. Termination is provided by the use of a jumper next to the connector if this is required for the BACnet MSTP network.
Ethernet
- Ethernet communications channel which can be used for dedicated data transmission of Innotech data to iComm and provide a BAC/IP connection for the BACnet Gateway. Connectivity is provided through an RJ45 socket on the top right of the product.

The BACnet Gateway is pre-programmed with the following TCP/IP parameters: