IMF430N Multifunction Module Product Details

Home > Products > Product Search > Product Details > IMF430N Multifunction Module

IMF430N Multifunction Module

Stand-alone / Signal Adaptors

This product has been discontinued.

Do you need help finding a replacement product? Contact Us
Email: sales@innotech.com
Phone: +61 7 3421 9100

IMF4000 - Controller Only.
IMF420N - Controller with ISR4002 or 4.
IMF430N - Controller with IPR4001, 2, 3, 4 or 5.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Pulsed Input Section:
- Separate inputs for step up and step down.
- Adjustable DELAY RATE to ensure that the controller does not respond to transient changes.
Proportional Controller:
- PB adjustable over two ranges of 0.2-2.0V DC and 1-10V DC.
- Can be configured for DIRect or REVerse operation.
- OFFSET adjustment of 0-10V DC can either add to or subtract from the input.
- Offset source can be set to either INTernal or EXTernal.
- Ramp Up and Ramp Down times separately adjustable.
- Interface to a wide range of devices that use a DC voltage Control Signal.
- The Innotech enclosure saves space and reduces installation time.

The Innotech range of multifunction controllers are designed for applications requiring interfacing between systems using different input and output signals. They are available as a pulse input and proportional controller only or with any of the Innotech IPR or ISR relay cards fitted in the same enclosure.

The pulse input section provides a 0-10V DC control signal output that can be caused to increase or decrease by closing the floating contacts on units such as head pressure and suction pressure controls.

The proportional controller section provides a 0-10V DC time integrated control output from a variable DC voltage input. An offset voltage can be applied from either the fixed internal or a variable external source to add to or subtract from the input signal.

The IMF is ideally suited for interfacing between systems with different starting and control span voltages:
e.g. 6-9V DC in = 0-10V DC out.
0-10V DC in = 6-9V DC out.
0-10V DC in = 10-0V DC out.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply: