IHC4001 Humidity Controller Product Details

Home > Products > Product Search > Product Details > IHC4001 Humidity Controller

IHC4001 Humidity Controller

Stand-alone / Controllers

The Innotech humidity controller is designed for use with a humidity detector which has a 0-10V DC output to produce two 0-10V DC outputs to control humidity in single and multizone air conditioning systems.

The controller's output can be coupled to auxiliary units such as humidifiers, chilled water valves, damper motors, staging relays and signal selectors.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Interface to Building Automation Systems.
Time integrated proportional control action for optimum system performance.
Separate 0-10V DC outputs for humidification and dehumidification.
Separate proportional band adjustment for humidification and dehumidification.
Humidity easily read at controller.
Set Point easily read at controller.
Factory set for most applications resulting in reduced commissioning time.
The Innotech enclosure saves space and reduces installation time.
Wide range of applications.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Voltage: 24 V AC ±10% @ 50/60 Hz.
Power Consumption: 2 VA max.

Inputs:

0-10V DC from Humidity Detector.
Reset (0-10V DC).
Remote Set Point.

Outputs:

Humidity Out (0-10V DC = 0-100%).
Set Point Out (0-10V DC = 0-100%).
Two 0-10V DC control outputs (hum. & dehum.).
One +12V DC 10mA supply for detector.

Terminal Identification:

1 = 24V DC supply for detector @ 50MA.
2 = Detector input.
3 = Humidity out.
4 = External Set Point.
5 = 12V DC aux supply.
6 = Set Point out.
7 = 0-10V DC dehumidification output.
8 = 0-10V DC humidification output.
9 = Common and 0V AC supply.
10 = 24V AC supply.

Temperature Ratings:

Storage 0 to 50°C non-condensing.
Operating 0 to 40°C non-condensing.

Enclosure:
The IHC4001 is housed in a rectangular case suitable for DIN Rail mounting. The housing is moulded from flame retardant plastics recognised by UL as UL 94-V0.

Colour: Grey.
Dimensions(max): 75mm(w) x 155mm(h) x 104mm (d)