ITC4701 Single Term Controller for Cooling Product Details

Home > Products > Product Search > Product Details > ITC4701 Single Term Controller for Cooling

ITC4701 Single Term Controller for Cooling

Stand-alone / Controllers

The ITC4701 temperature controller is designed for use with a two wire current loop temperature detector to produce a single 0-10V DC direct acting output. It has modified Dead Zone and Ramp adjustments to meet the needs of special applications.

The controller's output can be coupled to auxiliary units such as staging relays to control the loading of compressors, chilled water valves, damper motors and signal selectors.

The Innotech ITD, ITI and ITW two wire current loop temperature detectors are designed to operate with the ITC4701 temperature controller.

NOTE: This product was previously called ITC4010.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Interface to Building Automation Systems.
Dual Set Point range 0 - 10°C and 0 - 20°C.
0-10V time integrated proportional control signal output.
Proportional band adjustable from 0.2 to 11°C.
Reset of Set Point by 0 to 10°C up or down.
Adjustable Dead Zone below Set Point to activate Output Kill.
Detector temperature easily read at controller.
Set Point temperature easily read at controller.
Time integrated proportional control action to ensure optimum performance.
Factory set for most applications resulting in reduced commissioning time.
The Innotech enclosure saves space and reduces installation time.
Internal tamper proof Set Point adjustment.

The Innotech ITC4701 temperature controller is designed for use with a two wire current loop temperature detector to produce a single 0-10V DC direct acting output. It has modified Dead Zone and Ramp adjustments to meet the needs of special applications.

The controller's output can be coupled to auxiliary units such as staging relays to control the loading of compressors, chilled water valves, damper motors and signal selectors.

The Innotech ITD, ITI and ITW two wire current loop temperature detectors are designed to operate with the ITC4701 temperature controller.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Voltage: 24 V AC ±10% @ 50/60 Hz.
Power Consumption: 2 VA max.

Inputs:

1 x Two wire current loop temperature detector.
Reset or external Set Point (0-10V DC).

Outputs:

Temperature out 0.1V DC per °C.
Set Point out 0.1V DC per °C.
One 0-10V DC control output for cooling.

Terminal Identification:

1 & 2 = Detector connection.
3 = Temperature Out.
4 = Reset or Remote Set Point.
5 = 12V DC aux. supply.
6 = Set Point Out.
7 = 0-10V DC cool output.
8 = no connection.
9 = Common and 0V AC supply.
10 = 24V AC supply.

Temperature Ratings:

Storage 0 to 50°C non-condensing.
Operating 0 to 40°C non-condensing.

Enclosure:
The ITC4701 is housed in a rectangular case suitable for DIN Rail mounting. The housing is moulded from flame retardant plastics recognised by UL as UL 94-V0.

Colour: Grey.
Dimesions(max): 75mm(w) x 155 mm(h) x 97 mm(d)