ITC4001 Temperature Controller Product Details

Home > Products > Product Search > Product Details > ITC4001 Temperature Controller

ITC4001 Temperature Controller

Stand-alone / Controllers

The temperature controller is designed for use witha two wire current loop temperature detector to produce two 0-10V DC outputs.

The controller's output can be connected to auxiliary units, such as, chilled water valves, damper motors, staging relays and signal selectors to control the heating and cooling in single and multizone air conditioning systems.

The Innotech ITD, ITI and ITW series of two wire current loop temperature detectors are designed to operate with the ITC temperature controller.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Interface to Building Automation Systems.
Dual range 0 - 50°C or 0 - 100°C.
Time integrated proportional control action for optimum system performance.
Separate 0-10V DC outputs for heating and cooling.
Separate proportional band adjustment for heating and cooling.
Multiple detector averaging.
Reset up or down of Set Point adjustable from 0 to 10°C.
Standby mode enabled by voltage free contact.
Detector temperature easily read at controller.
Set Point temperature easily read at controller.
Factory set for most applications resulting in reduced commissioning time.
The Innotech enclosure saves space and reduces installation time.
Wide range of applications.

The Innotech temperature controller is designed for use with a two wire current loop temperature detector to produce two 0- 10V DC outputs.

The controller's output can be connected to auxiliary units, such as, chilled water valves, damper motors, staging relays and signal selectors to control the heating and cooling in single and multizone air conditioning systems.

The Innotech ITD, ITI and ITW series of two wire current loop temperature detectors are designed to operate with the ITC temperature controller.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Voltage: 24 V AC ±10% @ 50/60 Hz.
Power Consumption: 2 VA max.

Inputs:

Two wire current loop temperature detector.
Reset 0-10V DC.
Standby mode via contact closure.
Remote Set Point.

Outputs:

Temperature out 0.1V DC per °C.
Set Point out 0.1V DC per °C.
Two 0-10V DC control outputs heat & cool.

Terminal Identification:

1 & 2 = Detector connection.
3 = Temperature Out.
4 = Reset or Remote Set Point.
5 = Standby or +12V DC supply for Reset.
6 = Set Point Out.
7 = 0-10V DC cool output.
8 = 0-10V DC heat output.
9 = Common and 0V AC supply.
10 = 24V AC supply.

Temperature Ratings:

Storage 0 to 50°C non-condensing.
Operating 0 to 40°C non-condensing.

Enclosure:
The ITC4001 is housed in a rectangular case suitable for DIN Rail mounting. The housing is moulded from flame retardant plastics recognised by UL as UL 94-V0.

Colour: Grey.
Dimesions(max): 75mm(w) x 155 mm(h) x 97 mm(d)